Additional Information - Omron H7EC Manual

Additional Information

I Using the Operation Keys
Counter Operation
Configuration selection mode
Configuration selection
DIP switch monitor
Note: 1. Perform settings using the
2. The above flowcharts outline the procedures for all models. For more details on each model, refer to page 107.
Power ON
+ 1
1 s min.
Run mode
+ 1
1-stage counter
1 s min.
Present value, set value
2-stage counter
Present value, set value 1
Present value, set value 2
Total and preset counter
Present value, set value
Total count value
Batch counter
Present value, set value
Batch count value,
batch count set value
Dual counter
Dual count value,
dual count set value
CP1 present value,
CP2 present value
and keys ( key only with 6-digit models).
3 s min.
Function setting mode
3 s min.
Dual count calculating mode
One-shot output time
One-shot output 2 time
One-shot output 1 time
Reset input signal width
Decimal point position
NPN/PNP input mode
Multifunction Preset Counter
Counting stopped
Counting possible
Input mode
Output mode
Counting speed
Prescale value
Display color
Output allocation
Key protect level
H7CX
C-125