Omron H7EC Manual page 24

Dimensions
Note: All units are in millimeters unless otherwise indicated.
H7ER-N
Dimensions with Flush Mounting Bracket
Note: A Compact Flush Mounting Bracket (Y92F-35) can also be used. Refer to Accessories for details.
C-30
Self-powered Tachometer
H7ER
Panel Cutout
Separate mounting
40 min.
+0.5
45
0
+0.5
22.2
0
Dense mounting
+1.0
(48 Units − 2.5)
0
Waterproofing is not possible
for dense mounting
• When mounting, insert the Counter into
the cutout, insert the adapter from the
back and push in the Counter while
making the gap between the front panel
and the cutout panel as small as
possible. Use screws to secure the
Counter. If waterproofing is desired,
insert the waterproof packing.
• When several Counters are installed,
ensure that the ambient temperature
will not exceed specifications.
• The appropriate thickness of the panel
is 1 to 5 mm.
+0.5
22.2
0