Omron H7EC Manual page 122

• Dual Counter
Parameter name
Dual count Dual count value ---
value, dual count
Dual count set
set value
value
CP1 present CP1 present
value, CP2 value
present value
CP2 present
value
Note: 1. The input mode is increment/decrement mode and the output mode is K-2, D, L, or H.
2. The dual count calculating mode is subtraction mode and the output mode is K-2, D, L, or H.
Function Setting Mode
Parameter name
Input mode
cntm
Dual count calculating
caln
mode
Output mode
outm
One-shot output time otim
One-shot output 2 time otm2
One-shot output 1 time
otm1
Counting speed cnts
Reset input signal width
iflt
Decimal point position dp
Prescale value
pscl
NPN/PNP input mode imod
Display color colr
Output allocation
otst
Key protect level kypt
Note: 1. The setting range varies with the output mode.
2. The setting range varies with the model and the input mode.
3. HOLD cannot be set when the output mode is K-2.
C-128
Multifunction Preset Counter
Parameter
-99999 to 999999 (-999 to 9999)
0 to 999999 (0 to 9999) (For conditions other
---
than those described in note 2.)
-99999 to 999999 (-999 to 9999)
(See note 2.)
0 to 999999 (0 to 9999)
---
0 to 999999 (0 to 9999)
---
Parameter
up/down/ud-a/ud-b/ud-c (See note 1.)
add/sub (See note 1.)
n/f/c/r/k-1/p/q/a/k-2/d/l/h (See note 2.)
0.01 to 99.99
0.01 to 99.99
hold/0.01 to 99.99 (See note 3.)
30h=/skh=
20ms/1ms
------/-----.-/----.--/---.---
(----/---.-/--.--/-.---)
0.001 to 99.999 (0.001 to 9.999)
npn/pnp
red/grn/r-g/g-r
off/on
kp-1/kp-2/kp-3/kp-4/kp-5
H7CX
Setting range
Setting range
Default value Unit
---
0
0 ---
---
0
0 ---
Default value Unit
---
up
---
add
---
n
0.50 s
0.50 s
s
hold
30h= ---
---
20ms
------
(----)
---
1.000
npn ---
red ---
---
off
kp-1 ---
Set value
---
---
---
Set value