Power Connector (Cn1); Lan: Ethernet Connector (Cn4) - Advantech UNO-148 User Manual

A.1

Power Connector (CN1)

Table A.1: Power Connector Pin Assignments
Pin Signal
1 Power IN V+
2 Power IN V- (GND)
A.2

LAN: Ethernet Connector (CN4)

Table A.2: Ethernet Connector Pin Assignments
RJ45 Pin Signal
1 MDI0+
2 MDI0-
3 MDI1+
6 MDI1-
4 MDI2+
5 MDI2-
7 MDI3+
8 MDI3-
Left LED
10 Link
Off
UNO-148 User Manual
Description
10 - 36 V
DC
Description
In BASE-T: Media Dependent Interface[0]:

2500BASE-T: In MDI configuration, MDI[0]+/- cor-

responds to BI_DA+/- and in MDI-X configuration
MDI[0]+/- corresponds to BI_DB+/-.
10BASE-T and 100BASE-TX: In MDI configuration,

MDI[0]+/- is used for the transmit pair and in MDIX
configuration MDI[0]+/- is used for the receive pair.
In BASE-T: Media Dependent Interface[1]:

2500BASE-T: In MDI configuration, MDI[1]+/- cor-
responds to BI_DB+/- and in MDI-X configuration
MDI[1]+/- corresponds to BI_DA+/-.
10BASE-T and 100BASE-TX: In MDI configuration

MDI[1]+/- is used for the receive pair and in MDI-X
configuration MDI[1]+/- is used for the transmit pair.
In BASE-T: Media Dependent Interface[3:2]:

2500BASE-T: In MDI and in MDI-X configuration,
MDI[2]+/- corresponds to BI_DC+/- and MDI[3]+/ -
corresponds to BI_DD+/-.
100BASE-TX: Unused.

10BASE-T: Unused.

100 Link 1000/2500 Link
Orange Green
54
Right LED
Active
Green