Table of Contents
Advertisement
1 Points to Note When Disassembling/Assembling
the Machine
The mechanical characteristics and sequences of operation are described together with ex-
planations of how the machine may be disassembled and assembled; keep the following in
mind when disassembling/assembling the machine:
1.
Disconnect the power plug and the modular cable in advance for safety. Be sure also
to disconnect all cables used to connect the machine to the PC.
2. Reverse the steps used to disassemble the machine when assembling the machine, i.e.,
unless otherwise stated.
3. Identify the screws by type (length, diameter) and location.
4. The mounting screws for the grounding wire and varistors come with a toothed washer
to ensure electrical continuity. Be sure not to leave out the washers.
5. Do not, as a rule, operate the machine with any of its parts removed.
6. Touch a metal portion of the machine before handling PCBs and contact sensor, thereby
protecting PCBs against static damage.
COPYRIGHT © 2002 CANON INC.
2000 2000 2000 2000
CANON SmartBase PC1210D/1230D/1270D REV. 1 MAR. 2002
CHAPTER 5 MECHANICAL SYSTEM
5 - 1
Advertisement
Table of Contents
Troubleshooting
