Epson WF-4830 Series User Manual page 367

Administrator Information
Items
Enable LLMNR
LPR Settings
Items
Allow LPR Port Printing
Printing Timeout (sec)
RAW(Port9100) Settings
Items
Allow RAW(Port9100) Printing
Printing Timeout (sec)
IPP Settings
Items
Enable IPP
Allow Non-secure Communication
Communication Timeout (sec)
URL(Network)
URL(Wi-Fi Direct)
Printer Name
Location
SNMPv1/v2c Settings
Items
Enable SNMPv1/v2c
Access Authority
>
Advanced Security Settings
Setting value and Description
Select this to enable LLMNR. You can use name resolution
without NetBIOS even if you cannot use DNS.
Setting value and Description
Select to allow printing from the LPR port.
Enter the timeout value for LPR printing between 0 to 3,600
seconds. If you do not want to timeout, enter 0.
Setting value and Description
Select to allow printing from the RAW port (Port 9100).
Enter the timeout value for RAW (Port 9100) printing be-
tween 0 to 3,600 seconds. If you do not want to timeout, en-
ter 0.
Setting value and Description
Select to enable IPP communication. Only printers that sup-
port IPP are displayed.
Select Allowed to allow the printer to communicate without
any security measures (IPP).
Enter the timeout value for IPP printing between 0 to 3,600
seconds.
Displays IPP URLs (http and https) when the printer is con-
nected to the network. The URL is a combined value of the
printer's IP address, Port number, and IPP printer name.
Displays IPP URLs (http and https) when the printer is con-
nected by Wi-Fi Direct. The URL is a combined value of the
printer's IP address, Port number, and IPP printer name.
Displays the IPP printer name.
Displays the IPP location.
Setting value and Description
Select to enable SNMPv1/v2c.
Set the access authority when SNMPv1/v2c is enabled. Se-
lect Read Only or Read/Write.
367
>
Controlling Using Protocols