Epson WF-4830 Series User Manual page 365

Administrator Information
Controlling protocols
Configure the protocol settings.
1. Access Web Config and then select the Network Security tab > Protocol.
2. Configure each item.
3. Click Next.
4. Click OK.
The settings are applied to the printer.
Related Information
"Application for Configuring Printer Operations (Web Config)" on page 271
&
"Protocols you can Enable or Disable" on page 365
&
"Protocol Setting Items" on page 366
&
Protocols you can Enable or Disable
Protocol
Bonjour Settings
SLP Settings
WSD Settings
LLTD Settings
LLMNR Settings
LPR Settings
RAW(Port9100) Settings
IPP Settings
SNMPv1/v2c Settings
SNMPv3 Settings
Related Information
"Controlling protocols" on page 365
&
>
Advanced Security Settings
Description
You can specify whether to use Bonjour. Bonjour is used to search for devices, print, and so
on.
You can enable or disable the SLP function. SLP is used for push scanning and network
searching in EpsonNet Config.
You can enable or disable the WSD function. When this is enabled, you can add WSD devices,
and print from the WSD port.
You can enable or disable the LLTD function. When this is enabled, it is displayed on the
Windows network map.
You can enable or disable the LLMNR function. When this is enabled, you can use name
resolution without NetBIOS even if you cannot use DNS.
You can specify whether or not to allow LPR printing. When this is enabled, you can print from
the LPR port.
You can specify whether or not to allow printing from the RAW port (Port 9100). When this is
enabled, you can print from the RAW port (Port 9100).
You can specify whether or not to allow printing from IPP. When this is enabled, you can print
over the Internet.
You can specify whether or not to enable SNMPv1/v2c. This is used to set up devices,
monitoring, and so on.
You can specify whether or not to enable SNMPv3. This is used to set up encrypted devices,
monitoring, etc.
>
Controlling Using Protocols
365