Epson WF-4830 Series User Manual page 276

Product Information
"Entering Characters" on page 24
&
Printer Settings
Select the menus on the control panel as described below.
Settings > General Settings > Printer Settings
Paper Source Settings:
Paper Setting:
Select the paper size and paper type you loaded in the paper source.
A4/Letter Auto Switching:
Select On to feed paper from the paper source set as A4 size when there is no paper source set
as Letter, or feed from the paper source set as Letter size when there is no paper source set as
A4.
Auto Select Settings:
This menu is available for models with multiple paper sources.
When paper runs out, paper is automatically fed from a paper source that has the same
settings as the paper settings for the print jobs. You can set automatic selection for every paper
source for each function in copy, fax, or other. You cannot set everything to off.
This setting is disabled when you select a specific paper source in the paper settings for the
print jobs. Depending on the paper type setting on the Main tab of the printer driver, paper
may not be fed automatically.
Error Notice:
Select On to display an error message when the selected paper size or type does not match the
loaded paper.
Paper Setup Auto Display:
Select On to display the Paper Setting screen when loading paper in the paper cassette. If you
disable this feature, you cannot print from an iPhone, iPad, or iPod touch using AirPrint.
Universal Print Settings:
These print settings are applied when you print by an external device without using the printer driver.
The offset settings are applied when you print using the printer driver.
Top Offset:
Adjust the top margin of the paper.
Left Offset:
Adjust the left margin of the paper.
Top Offset in Back:
Adjust the top margin for the back of the page when performing 2-sided printing.
> >
Settings Menu List General Settings
276