Epson WF-4830 Series User Manual page 358

Administrator Information
Settings > General Settings > Basic Settings > Power Off Settings >Power Off If Disconnected
3. Click OK.
Setting the Sound
Make the sound settings when operating the control panel, printing, faxing and so on.
Note:
You can also set up from the printer's control panel.
Settings > General Settings > Basic Settings > Sounds
1. Access Web Config and select the Device Management tab > Sound.
2. Set up the following items as necessary.
❏ Normal Mode
Set the sound when the printer is set to Normal Mode.
❏ Quiet Mode
Set the sound when the printer is set to Quiet Mode.
This is enabled when the one of the following items is enabled.
❏ Printer's control panel:
Settings > General Settings > Printer Settings > Quiet Mode
Settings > General Settings > Fax Settings > Receive Settings > Print Settings > Quiet Mode
❏ Web Config :
Fax tab > Print Settings > Quiet Mode
3. Click OK.
Synchronizing the Date and Time with Time Server
When synchronizing with the time server (NTP server), you can synchronize the time of the printer and the
computer on the network. The time server may be operated within the organization or published on the Internet.
When using the CA certificate or Kerberos authentication, time-related trouble can be prevented by synchronizing
with the time server.
1. Access Web Config and select the Device Management tab > Date and Time > Time Server.
2. Select Use for Use Time Server.
3. Enter the time server address for Time Server Address.
You can use IPv4, IPv6 or FQDN format. Enter 252 characters or less. If you do not specify this, leave it blank.
4. Enter Update Interval (min).
You can set up to 10,080 minutes by the minute.
>
Settings to Use the Printer
358
>
Making Basic Operation Settings for the Printer