Epson WF-4830 Series User Manual page 357

Administrator Information
1. Access Web Config and select the Device Management tab > Control Panel.
2. Set up the following items as necessary.
❏ Language
Select the displayed language on the control panel.
❏ Operation Timeout
If you select ON, when you log in as the access control user or administrator, you are automatically logged
out and go to the initial screen if there is no activity for a certain period of time.
You can set between 10 seconds and 240 minutes by the second.
Note:
You can also set up from the printer's control panel.
❏ Language : Settings > General Settings > Basic Settings > Language
❏ Operation Timeout : Settings > General Settings > Basic Settings > Operation Time Out (You can specify On or
Off.)
3. Click OK.
Power Saving Settings During Inactivity
You can set up the time to shift to the power saving mode or to turn the power off when the printer's control panel
is not operated for a certain period of time. Set the time depending on your usage environment.
1. Access Web Config and select the Device Management tab > Power Saving.
2. Set up the following items as necessary.
❏ Sleep Timer
Enter the time to switch power saving mode when inactivity occurs.
Note:
You can also set up from the printer's control panel.
Settings > General Settings > Basic Settings > Sleep Timer
❏ Power Off Timer or Power Off If Inactive
Select a time to automatically turn off the printer after it has been inactive for a specific time. When you are
using the fax features, select None or Off.
Note:
You can also set up from the printer's control panel.
Settings > General Settings > Basic Settings > Power Off Timer or Power Off Settings
❏ Power Off If Disconnected
Select this setting to turn off the printer after 30 minutes automatically when all ports including the LINE
port are disconnected.
This feature may not be available depending on your region.
Note:
You can also set up from the printer's control panel.
>
Settings to Use the Printer
357
>
Making Basic Operation Settings for the Printer