Device Settings - Teledyne T3AWG2152 Operator's Manual

Device Settings

The "Device Settings" page contains the general setting of the instrument, such as the clock source and
the Marker Out setting.
Touching the "Settings" button
channel settings page open. Slicing the page from right to left or touching the last point on the bottom
of the page the Device Setting page is displayed.
Device Setting
Reference
Clock
Ext. Ref.
Clock[MHz]
Trigger IN
Marker Out
Operator's Manual Simple AFG Application
in the menu bar or the "SETTINGS" button on the keyboard the
Description
It can be Internal or External. If it is
Internal the DAC sampling clock is
generated internally. If it is External the
DAC sampling clock is synthesized starting
from the external clock source provided to
to the External Reference SMA connector
located in the rear panel. The external
reference clock frequency must me
specified in the Ext. Ref. Clock[
parameter.
This textbox define the External Reference
Clock frequency in
effect only if the Reference Clock is set on
External.
Use this group of parameters to define the
Trigger In behaviour (see the table below).
Use this group of parameters to define the
Marker Out behaviour (see the table
below).
]
MHz
. This parameter has
MHz
55