Appendix; Specifications And Initial Settings - Teledyne 4060 Series Instruction, Operating And Maintenance Manual

Series 4060

Appendix

A.1 Specifications and Initial Settings:
Range(s):
Power Requirements:
Signal Output:
Alarms:
Calibration Contact:
RS-232 Output: Provided
Ambient Temp: 0 – 40º C. Install in a well ventilated area
Teledyne Analytical Instruments
Refer to Addendum and Testing Results
in Appendix B.
Refer to Addendum and Testing Results
in Appendix B.
Two analog channels:
Channel 1: 0-1 VDC and isolated 4-20
mADC
Channel 2: 0-1 VDC and isolated 4-20
mADC
User configurable as: Benzene, other
aromatics, Total HC, and Peak traces.
Two Concentration Alarm 'C' Type
relay contacts. User
configurable.
One System Alarm for AC power failure
and flame out, fail safe, 'C' type relay
contacts.
Calibration Contact, 'A' Type Relay
contact for span mode indication.
Appendix
75