Table of Contents
Advertisement
Operator's Manual Simple AFG Application
Main Command Button Description
Save Settings
The button "Save Settings"
in the "More" menu allows to save the current instrument settings
called "memory". In the relative dialogue box, you can save a new memory entry or overwrite an existing
one. If you try to overwrite an existing memory entry, a dialogue box appears to ask confirmation.
The file extension for the memory file is ".afs".
In the bottom textbox you can type a new name then pressing the "Save" button
the memory will be saved.
In this page it is possible to choose to destination folder to save the current settings. The "pencil"
activates the textbox to specify a path. The "house button"
on the top left sets the path to
home path and the "left arrow"
restores the path to the previous one.
Note: Some file names are reserved for the "Memory State" accessible by Remote Commands. The
reserved names are: Memory0.afs, Memory1.afs, ..., Memory4.afs, ... It is possible to use that names but
they will be deleted or overwritten by remote commands without confirmation. Take also care that the
"Memory0.afs" saves the last settings before the instrument is power off. Therefore this file is
overwritten every time that the instrument is powered off.
50
Advertisement
Table of Contents
