Modulation - Teledyne T3AWG2152 Operator's Manual

Modulation

In this Run Mode, it is possible to modulate a carrier waveform with a modulation law. All waveforms
except Noise and DC level support the Modulation Run Mode.
Touching the "Type" button the modulation type menu opens as shown in the picture below.
The modulation types are:
•
Amplitude Modulation (AM)
•
Frequency Modulation (FM)
•
Phase Modulation (PM)
•
Frequency Shift Keying (FSK)
•
Phase Shift Keying (PSK)
•
Pulse Width Modulation (PWM)
The PWM modulation is the only modulation supported by the Pulse waveform.
The types of modulation are explained in detail in the following sections of this chapter.
Marker out (blue, top) synchronous with the analog signal (red, bottom)
Operator's Manual Simple AFG Application
43