Installation; Mounting The Module On A Din Rail - Mitsubishi Electric NZ2MF2S1-32D User Manual

6.4

Installation

Mounting the module on a DIN rail

An example of the use of the DIN rail stopper is described in the following procedure. Fix the module
according to the manual of the DIN rail stopper used.
Mounting procedure
1.
Pull down all DIN rail hooks on the back of the module.
The hooks should be pulled down until they click.
2.
Hang the upper tabs of the module on a DIN rail, and
push the module in position.
3.
Lock the DIN rail hooks to the DIN rail to secure the
module in position.
Push each hook up until it clicks. If the hooks are beyond the
reach, use a tool such as a driver.
4.
Loosen the screw on DIN rail stopper.
5.
Hitch the bottom hook of the DIN rail stopper to the
bottom of the DIN rail.
Hitch the hook according to the orientation of the arrow on
the front of the stopper.
6.
Hitch the upper hook of the DIN rail stopper to the top of
the DIN rail.
6 INSTALLATION AND WIRING
6
75
6.4 Installation