Diagnostic Information Details - Mitsubishi Electric NZ2MF2S1-32D User Manual

Diagnostic information details

This section shows the details of diagnostic information of slave station that can be checked in the special register (SD) or
buffer memory of master station.
Note that the information shown here are diagnostic information 2 only.
For other diagnostic information, refer to the following.
 CC-Link IE Field Network Basic Reference Manual
Manufacturer code
0000H (fixed) (manufacturer code for I/O module) is stored.
Model code
Model code for I/O module is stored.
Model name
NZ2MFB2-16A
NZ2MFB1-32D
NZ2MF2S1-32D
NZ2MFB2-16R
NZ2MFB1-32T
NZ2MF2S1-32T
NZ2MFB1-32TE1
NZ2MF2S1-32TE1
NZ2MFB1-32DT
NZ2MF2S1-32DT
NZ2MFB1-32DTE1
NZ2MF2S1-32DTE1
Device version
0001H (fixed) (device version for I/O module) is stored.
Module information
Operating status of I/O module is stored.
■bit0 (I/O control status)
I/O control status of I/O module is stored.
Stored value
0
1
■bit1 to bit15 (use prohibited)
Use of this area is prohibited.
Error code
An error code is stored when an I/O module specific error occurs.
For error codes to be stored, refer to the following.
Page 114 I/O module specific error
Detailed module information (lower)
Use of this area is prohibited.
Model code (upper)
0000H
0000H
0000H
0000H
0000H
0000H
0000H
0000H
0000H
0000H
0000H
0000H
I/O control status
A moderate or major error has occurred, and I/O processing is stopped.
No error or minor error has occurred, and I/O processing is under operation.
Appendix 4 Diagnostic Information of Slave Station
Model code (lower)
3006H
3001H
3008H
3007H
3002H
3009H
3003H
300AH
3004H
300BH
3005H
300CH
APPX
A
125