Rf Channel; Retry; Retry Position; Retry Lables - Toshiba B-EX6 Series Maintenance Manual

5. SYSTEM MODE

5.10.2.4 RF CHANNEL

A channel used for RFID tag write is set.
・ AUTO
・ 2CH
・ 3CH
・ 4CH
・ 5CH
・ 6CH
・ 7CH
・ 8CH
NOTES:
1. When a channel is chosen from 2CH to 8CH, that channel will be continuously used.
2. When the channel is set to AUTO, an available channel is searched in the following order:

(2CH 8CH
3. The channel setting works effectively only for the B-EX706-RFID-U4-R(*).
*: The frequencies used for the B-EX706-RFID-U4-R are as follows.
Channel
Frequency (MHz)

5.10.3 RETRY

The parameters related to retry are set.
The menu structure of RETRY menu
Menu item
<7>RFID
RETRY

RETRY POSITION

RETRY LABELS
READ RETRY
WRITE RETRY
5.10.3.1 RETRY POSITION
Max.
Min. value
value
+99 -99
If writing data on a tag failed, the printer feeds the RFID tag forward or backward for specified length,
in order to retry data write. When "0" is set for this parameter, a retry is not performed.
Only the value of -3mm or less or +3mm or more is effective.

5.10.3.2 RETRY LABLES

Max.
Min. value
value
255 0
When issuing an RFID tag failed, the printer prints the error (Void) pattern, and retries to issue a tag for
up to the specified number of times. If the printer does not succeed even after having retried for the
specified number of times, the printer stops, resulting in an RFID WRITE error.
  
6CH 4CH 3CH
2CH 3CH
921.0 921.2 921.4 921.6 921.8 922.0 922.2
Step Display
1 Decimal
Step Display
1 Decimal
  
7CH 5CH 2CH)
4CH 5CH 6CH
Integer
Sign
digit
None 2
Integer
Sign
digit
None 3
5-70
7CH 8CH
Decimal
0-padding
place
0 None
Decimal
0-padding
place
0 None
EM18-33031
5.10 RFID
Unit of
measure
mm
Unit of
measure
Labels