Toshiba B-EX6 Series Maintenance Manual page 91

5. SYSTEM MODE
4-4 When an error occurred during printing
CHECKING & PRINT
RIBBON ERROR
PRINT TYPE
▲
THERMAL TRANSFER
DIRECT THERMAL
DISPLAY
▼
5. In the case DISPLAY is selected:
PRINT TYPE
5-1
▲
THERMAL TRANSFER
DIRECT THERMAL
DISPLAY
▼
DISPLAY
5-2
▲
COUNTER
ADJUSTMENT(PC)
STORAGE AREA
USB SERIAL NUMBER
▼
COUNTER
5-3
▲
TOTAL FEED
FEED
FEED1
FEED2
▼
C1.6
C1.6
4.8km
0.0km
4.8km
0.0km
The printer displays the error message, and stops.
The ERROR LED turns on and the ONLINE LED turns
off.
1. Press the [ENTER] or [CANCEL] key.
2. PRINT TYPE menu is displayed.
Note: When the [MODE] key is pressed, the top menu
of the SYSTEM MODE is displayed
The printer recovers from the error, the ERROR LED
turns off and the ONLINE LED turns on.
Note that the printer does not reprint the label
automatically.
1. Select DISPLAY.
2. Press the [ENTER] key.
3. DISPLAY menu is displayed.
1. Select an item to be displayed.
2. Press the [ENTER] key.
3. The data of the selected item is displayed.
For details of the Maintenance counter data, refer to
Section 5.4.1.1 Counter Parameter Print
5-5
EO18-33031
5.4 DIAGNOSTIC
Contents.