Toshiba B-EX6 Series Maintenance Manual page 28

4. INSTALLATION PROCEDURE FOR OPTIONAL EQUIPMENT
4.1.3 Wiring of the Harness Ass'y
1. Pass the Harness Ass'y through the Cable Protector.
Harness Ass'y
Cable Protector
2. Fasten the Harness Ass'y with the Cable Clamp.
3. Connect the Harness Ass'y to J11 on the Main PC board.
Main PC Board
J11
4. Re-install the Side Panel (L) and close the Top Cover.
5. Refer to the Service Manual for the parameter settings and c heck the cutter operation.
Harness Ass'y
Cable Clamp
4-11
EO18-33031
4.1 DISC CUTTER (B-EX206-QM-R)