Toshiba B-EX6 Series Maintenance Manual page 61

4. INSTALLATION PROCEDURE FOR OPTIONAL EQUIPMENT
8. Connect the RFID Module to J1 on the Main PC Board with the Interface Cable.
Main PC Board
4.8.3 Attaching the Paper Guide
RFID paper guide is not required when using the RFID module with the cutter/peel-off option.
1. Turn the Head Lever to FREE position and gently put down to the side the Print Head Block Holder Plate.
Head
Lever
2. Open the Print Head Block.
Print Head Block
4.8 UHF RFID KIT (B-EX706-RFID-U4-US/EU/AU-R)
J1 Connector
4-44
EO18-33031
(Revision Date: Mar. 1, 2017)
Print Head Block Holder
Plate