Restart Touchscreen & Recalibrate; Factory Reset; Hmi Model Oem Only; Bic Model Oem Only - Bradford White OmniTech BONH1250 Installation And Operation Instructions Manual
Category ii and iv venting with touchscreen controls
Hide thumbs
Also See for OmniTech BONH1250:
Table of Contents
Advertisement
Page 94
8.E.6 Restart (Touchscreen & Recalibrate)
Touching the Restart Button on the Service Screen reboots the display. If the touchscreen seems to be out of
alignment, it can be recalibrated by pressing the Restart Button, promptly touching (and holding) the touch screen.
Follow the calibration procedure as shown on the touch screen.
8.E.7 Factory Reset
Touching the Factory Reset Button on the Service Screen resets all touch screen
adjustable parameters back to the factory default setting.
8.E.8
HMI Model
OEM only.
8.E.9
BIC Model
OEM only
.
8.E.10 Both Model.
8.E.11 About
About the Firmware version of the touchscreen.
8.E.12 Dev Fan
OEM only.
8.E.13 Fan Settings
OEM only.
OEM only.
S E R V I C E
GREY = Only available to the factory service tech or
to a technician qualified at the OEM level.
Advertisement
Table of Contents
