F Messages And Usb; Messages; Usb Functionality - Bradford White OmniTech BONH1250 Installation And Operation Instructions Manual
Category ii and iv venting with touchscreen controls
Hide thumbs
Also See for OmniTech BONH1250:
Table of Contents
Advertisement
8.F
Messages and USB
8.F.1 Messages
The 'Messages' icon at the bottom of the home screen
displays an 'Exclamation Point' when messages are present.
Press the icon to see the message(s).
8.F.2
USB Functionality
The USB port is on the back of the display. To access it, the control
display can be lifted off of the front of the unit and the USB port is
found behind the touchscreen. See Figure 39.
When the USB icon has appeared over the Message icon, press the USB
icon to access the USB menu. The following three tasks will be available:
• Download Parameters from the boiler: During a cascade setup or a
control replacement, enter the values in one unit, to copy into the others.
• Upload Parameters from the boiler: Uploads all parameters and
settings into a thumb drive for documentation purposes, or copies these
settings from unit to unit.
• Upload Data from the boiler: This is used to retrieve runtime data, and
history. It captures all settings in a tab delimited text file, for use with
spreadsheet programs.
Figure 39. Photo of USB Slot on
the back of touchscreen
display.
Page 95
Advertisement
Table of Contents
