Page 58
SECTION 8 Control Operation
8.A The Home Screen
CSP: is the Calculated Set Point
and is the Current Demand. This
could be either the CH1 (Central Heat
One), CH2, or the DHW (Domestic
Hot Water), depending on the model
and the installation set up.
8.A.1
Home Screen Active Icons
Name
Icon
Security
Quick Start
Configure
Service
Messages
Active
Demands
Navigation
Bar
LOCKOUTS and ERROR Codes are also show in the
unit Lockouts, Errors or Shut-downs that have occured. See
Date &
Time
Figure 29. Active Areas of the Home Screen
Displays the current lock status icon. Touch the lock icon to lock or unlock the
See Section 8.B on page 60
Touchscreen Display.
Provides quick access to the most commonly used parameters for easy installation.
See Section 8.C on page 61
Provices access to ALL of your configurations for a detailed setup of the unit.
Section 8.D on page 65
Allows the service technician to access the basic diagnostic and troubleshooting
See Section 8.E on page 90
information.
Will show an 'Exclamation Point' when there is a message.
Clicking onto the Message icon will take you to the message itself.
The USB functionality will show the USB Icon at this location, if
See Section 8.F on page 95
being used.
Will show icons that indicate the active parameters that are currently in
demand.
Top left of every menu. The constant indicator of where you are as you
navigate into and out of the touchscreens.
The alarm bell icon indicates that the units alarm has been silenced.
To change date and time, simply touch the date or time and follow the
directions.
Description
See Section 8.G on page 96
Navigation Bar
SECTION 12 on page 117
Section 8.D.9 on page 84
See
when there is one of several