Keypad Operations - Bradford White OmniTech BONH1250 Installation And Operation Instructions Manual
Category ii and iv venting with touchscreen controls
Hide thumbs
Also See for OmniTech BONH1250:
Table of Contents
Advertisement
8.A.2
Keypad Operations
NOTE: You can always tell exactly where you have navigated to
by looking at the icons in the
In this example you are in
Home / Configure / Central Heat / Central Heat One
A Typical Numeric Keypad Entry Screen.
Remember to always save the new setting with the
The "Back" button jumps to the previous screen.
A Typical Selection Screen.
Navigation Bar.
Shows the current setting
of the Parameter.
These windows will reflect the
allowable ranges of the parameter
To delete the current setting before
entering in the new value.
"Up and Down" arrows are used to
increment the setting accordingly.
The "Enter" button is used to
accept the new value.
This is the indicator that will be shown
when the correct password has been
entered to allow the setting to change.
button.
The highlighted button (orange) shows
which one is selected. Some screens
may only allow you to set one or
the other, while some other screens
(example: pump selection) will allow
you to select any or all of the options.
Page 59
Advertisement
Table of Contents
