Anti-Short Cycle; Time & Date - Bradford White OmniTech BONH1250 Installation And Operation Instructions Manual
Category ii and iv venting with touchscreen controls
Hide thumbs
Also See for OmniTech BONH1250:
Table of Contents
Advertisement
Page 64
8.C.5 Anti-Short Cycle
To navigate to the Anti-Short Cycle Quick Start Screen, touch the Anti-Short Cycle Icon on the Quick Start Screen.
The Anti-Short Cycle Quick Start Screen allows adjustment of the following parameter:
• Cycle Time – The amount of time after a heat demand is satisfied that the unit will wait to satisfy the next active heat demand.
NOTE: Anti-Short Cycle Time does not apply to DHW/DHW3 heat demands.
8.C.6
Time & Date
To navigate to the Time & Date Quick Start Screen, touch the Time & Date area on any screen.
NOTE: The Time is set in a 24 hour parameter, but displays only as a 12 hour clock
with the AM / PM automatically added.
The Time & Date Quick Start Screen allows adjustment of the following parameters:
• Hour
• Minute
• Month
• Day
• Year
Q U I C K S T A R T
Advertisement
Table of Contents
