Quick Start; Central Heat) - Bradford White OmniTech BONH1250 Installation And Operation Instructions Manual
Category ii and iv venting with touchscreen controls
Hide thumbs
Also See for OmniTech BONH1250:
Table of Contents
Advertisement
8.C Quick Start
Quick Start will allow a user to configure the basic functionality of the control,
without going through all of the parameters that are available.
The 6 basic functionalites are
• Central Heat,
• Domestic Hot Water,
• Outdoor Reset,
• Warm Weather Shutdown,
• Anti-short Cycle
`
and
• Time & Date
8.C.1 CH (Central Heat)
"CH" stands for "central heat." It is used for space heating demands. On the Quick Start Screen, touch the CH
thermometer icon to navigate to the CH Selection Screen
There are two identical heat demands, CH1 and CH2, each with independent control algorithms and independent inputs
on the input terminal strip, see "8.D Configuration" on page 65
Touching CH1 navigates to the CH1 Quick Start Screen
NOTE: Grey Icons indicate
'Non-Applicable'
Q U I C K S T A R T
Page 61
Advertisement
Table of Contents
