D.10.A Demands Priorities; D.10.B Anti-Short Cycle - Bradford White OmniTech BONH1250 Installation And Operation Instructions Manual
Category ii and iv venting with touchscreen controls
Hide thumbs
Also See for OmniTech BONH1250:
Table of Contents
Advertisement
8.D.10.a Demands Priorities
To navigate to the Demands Priorities Screen, first go to the Miscellaneous folder.
At the Demands Priorities screen select each configured demand and assign a priority number.
NOTE: Demands Priority is only active on the lag or stand alone boilers.
Remember to always save the new setting with the
8.D.10.b Anti-Short Cycle
To navigate to the Anti-Short Cycle Configuration Screen, touch the Miscellaneous Features Icon on the Configuration
Screen, then touch the Anti-Short Cycle Icon on the Miscellaneous Features screen.
The Anti-Short Cycle Configuration Screen allows adjustment of the following parameter:
• Cycle Time – The amount of time after a heat demand is satisfied that the unit will wait to initiate the next active heat
demand.
NOTE: Anti-Short Cycle Time does not apply to DHW/DHW3 heat demands.
Remember to always save the new setting with the
C O N F I G U R A T I O N
button.
button.
Page 85
Advertisement
Table of Contents
