FT
8.D.10.a Demands Priorities
To navigate to the Demands Priorities Screen, first go to the Miscellaneous folder.
At the Demands Priorities screen select each configured demand and assign a priority number.
Remember to always save the new setting with the
8.D.10.b Anti-Short Cycle
To navigate to the Anti-Short Cycle Configuration Screen, touch the Miscellaneous Features Icon on the Configuration
Screen, then touch the Anti-Short Cycle Icon on the Miscellaneous Features screen.
The Anti-Short Cycle Configuration Screen allows adjustment of the following parameter:
• Cycle Time – The amount of time after a heat demand is satisfied that the unit will wait to initiate the next active
heat demand.
NOTE: Anti-Short Cycle
Time does not apply to
DHW heat demands.
Remember to always save the new setting with the
C O N F I G U R A T I O N
button.
button.
Page 91