Table of Contents
Advertisement
FT
8.C Quick Start
Quick Start will allow a user to configure the BASIC functionality of the control, without going
through all of the parameters that are available.
The 6 BASIC functionalites at Quick Start are
• Central Heat,
• Domestic Hot Water,
• Outdoor Reset,
• Warm Weather Shutdown,
• Anti-short Cycle and
• Time & Date
8.C.1 CH (Central Heat)
"CH" stands for "Central Heat." It is used for space heating demands. On the Quick Start Screen, touch the CH
thermometer icon to navigate to the CH Selection Screen
There are two identical heat demands, CH1 and CH2, each with independent control algorithms and independent
inputs on the input terminal strip, see "8.D Configuration" on page 69
Touching CH1 navigates to the CH1 Quick Start Screen
Q U I C K S T A R T
Page 65
Advertisement
Table of Contents
