Advertisement
Reducing Speed While Using Cruise Control
There are two ways to reduce your speed while using
cruise control:
Press the button at the end of the lever until you
reach
the
lower speed you want, then release it.
To slow down in very small amounts, press the
button for less than half a second. Each time you do
this, you'll go about 1 mph (1.6 h / h ) slower.
Passing Another Vehicle While Using Cruise Control
Use the accelerator pedal to increase your speed.
When
you take your foot off the pedal, your vehicle will slow
down to the cruise control speed you set earlier.
When going up a steep hill, you may have to step on the
accelerator pedal to maintain your speed. When going
downhill, you may have to brake or shift to a lower gear
to keep your speed down. Of course, applying the brake
or clutch pedal takes you out of cruise control. Many
drivers find this to be too much trouble an'd don't use
cruise control on steep hills.
Ending Cruise Control
There are several ways to turn off the cruise control:
0
Step lightly on the brake pedal, or push the clutch
0
Move the cruise switch to dFF.
pedal, if you have
a
manual transaxle, OR
Using Cruise Control on Hills
How well your cruise control will work on hills depends
upon
your speed,
load and the
steepness of the kills.
Erasing
Cruise Speed
Memory
When you turn off the cruise control or the ignition,
your cruise control set speed memory is erased.
2-48
Advertisement
