Advertisement
Back-up Lamps (Sedan)
3. To remove the bulb, pull
it
out.
4. Push in a new bulb.
5. Reverse
all
steps
to
replace
the
taillamp assembly.
If you have
a
four-door sedan, do the following to
replace a back-up lamp.
1. Use a torx screwdriver to unscrew the back-up lamp
assembly from the fascia.
2. Gently pull the bulb assembly from the fascia.
3. Remove the bulb from the socket by turning it
4. Replace the bulb and bulb assembly by reversing
one-quarter turn counterclockwise.
these steps.
Back-up Lamps (Coupe)
If
you have a two-door coupe,
do
the following to
replace a back-up lamp:
1. Open the trunk lid and locate the back-up lamp
2. Gently remove the bulb from the socket by turning
it
assembly on the trunk lid.
counterclockwise and pulling it out.
3. Replace the bulb in the socket by aligning the tabs
and turning clockwise.
6-37
Advertisement
