Advertisement
Then go to the front of the vehicle and lift up on the
secondary hood release lever. The secondary hood
release lever is located near the front center of
the hood
toward the driver's side.
Lubricate the hood latch at least once
a
year.
Lift the hood, release the
hood prop from its retainer
and
put the hood prop into
the
slot in
the hood marked
"prop rod."
Use the prop rod sleeve
when handling the prop rod,
Before closing the hood, be sure all the filler caps me on
properly. Then lift the hood to relieve pressure on the
hood prop. Remsve the
hood
prop from the slot in
the
hood
and
return the prop to its retainer. Lower the hood
8 to 10 inches
(20 to 25 cm) above the vehicle and
release to latch fully. Check to make sure the hood is
closed and repeat if necessary.
6-8
Advertisement
