Advertisement
Dolby' Noise Reducrlon is manufactured under a
license from Dolby Laboratories Licensing Corpsrat:
L,
Dolby and the double-D symbol are trademarks of
Dolby Laboratories Licensing Corporation.
REV
( 5 ) :
Press this button to reverse the tape rapidly.
Press it again to return to playing speed. The radio will
play th'e last-selected station while the tape reverses.
You may select stations during REV operation by using
SEEK or TUNE.
FWD (6):
Press this button to advance quickly to
another part
of
the tape. Press the button again to return
to playing speed. The radio will play the last-selected
station while the tape advances. You may select st.ations
during FWD operation by using SEEK or TUNE.
AM-FM: Press this button to play the radio when a tape
is in the player.
TAPE/PLAY: Press this button to change to the tape
function when the radio is on. The tape symbol with an
arrow will appear on the display when the tape is active.
To return to playing the radio, press the AM-FM button.
EJECT:
Press this button to remove the tape. The radio
will play. EJECT may be activated with either
the
ignition or radio off. Cassettes may be loaded with the
radio and ignition off if this button is pressed first. If
you leave a cassette tape in the player while listening to
the radio, it may become warm.
CLN: If this message appears on the display, the
cassette tape player needs to be cleaned. It will still play
tapes, but you should clean it as soon as possible to
prevent damage to the tapes and player. See "Care of
Your Cassette
Tape
Player"
in
the Index. After you
clean
the player, press and hold
EJECT
for five seconds to
reset the CLN indicator. The radio will display
---
to
show the indicator was reset.
CD Adapter Kits
It
is possible to use a CD adapter
kit
with your cassette
tape player after activating the bypass feature on your
tape player.
To activate the bypass feature, the ignition must be on.
Turn
your radio off. Press TMEIpLAY and hold for
three seconds. After three seconds, the tape symbol
in the display will flash for two seconds indicating
the feature is active.
Turn
the radio on and insert
the adapter.
This override feature will remain active until EJECT
is pressed.
3-12
Advertisement
