Advertisement
4. Disconnect the bulb
base from the socket by lifting
5. Snap a new bylb into the socket.
6. Replace the bulb assembly by reversing Steps
1 through 3, making sure the lower leg of the
headlamp bracket is properly seated into the wedge
shaped retainer.
the plastic locking tab.
Rear Exterior Bulbs
The following
instructions explain how to change each bulb.
Taillamps and Rear Turn Signal Lamps
For
the type of bulb to use, see "Replacement Bulbs" in
the Index.
1. Pull the carpet away from the rear of the
trunk.
2.
Remove the taillamp bulb assembly by turning it
one-quarter of a turn counterclockwise.
6-36
Advertisement
