Appendix A: Genicam Commands - Dalsa Piranha XL XDR PX-HM-16K06X-00-R Manual

Appendix A: GenICam Commands

This appendix lists the available GenICam camera features. The user accesses these features using
the CamExpert interface.
Features listed in the description table but tagged as Invisible are typically reserved for Teledyne
DALSA Support or third party software usage, and not typically required by end user applications.
The following feature tables describe these parameters along with their view attributes and in
which version of the device the feature was introduced. Additionally the Device Version column will
indicate which parameter is a member of the DALSA Features Naming Convention (using the tag
DFNC), versus the GenICam Standard Features Naming Convention (SFNC tag not shown).
In the CamExpert Panes, parameters in gray are read only, either always or due to another
parameter being disabled. Parameters in black are user set in CamExpert or programmable via an
imaging application
The Device Version number represents the camera software functional group, not a firmware
revision number.
A note on the CamExpert examples shown here: The examples shown for illustrative purposes and may not entirely reflect the
features and parameters available from the camera model used in your application.
The Piranha XL XDR Camera • 43