Table of Contents
Advertisement
Display Name
Feature
Measured
measureExposureTime
Exposure Time
Refreshed
refreshMeasureExposureTime
measured
exposure time
Direction Source
sensorScanDirectionSource
Internal
External
Internal Direction
sensorScanDirection
Forward
Reverse
Row Selector
TDIStagesSelector
8 Rows
12 Rows
Extended Gain
gainExtended
Range
Gain
Gain
Offset
BlackLevel
Digital I / O Control Feature Descriptions
The camera's Digital I / O Control category is used to determine the source of the line sync
generator. The line synchronization can be internally generated by the camera or from the frame
grabber over the CLHS cable. CamExpert for the frame grabber can be used to then determine the
line sync source such as from the shaft encoder input.
The Piranha XL XDR Camera
Description
Specifies the exposure time provided to the camera
by either internal or external source (RO)
Press to display the current exposure time provided
to the camera.
Direction determined by value of
SensorScanDirection
Direction control determined by value on CLHS GPIO
bit 2, Frame grabber register #80524
When ScanDirectionSource set to Internal,
determines the direction of the scan
Selects the number of rows that will be used
Adjusts the sensor characteristics to optimize for
noise performance where the 4 rows would be
selected first with the maximum available light. If
there is insufficient response, add more rows.
Increase the maximum allowable gain.
Sets the gain as per the gain selector setting
Controls the black level as an absolute physical
value. This represents a DC offset applied to the
video signal, in DN (digital number) units.
Device
Version
& View
1.00
Beginner
1.00
Beginner
1.00
Beginner
1.00
Beginner
1.00
Beginner
1.00
Guru
1.00
Beginner
1.00
Beginner
• 49
Advertisement
Table of Contents
