Dalsa Piranha XL XDR PX-HM-16K06X-00-R Manual page 57

Extended dynamic range
Table of Contents

Advertisement

Test Pattern
Off
Each Tap Fixed
Grey Horizontal Ramp
Pixel Format
Mono8
Mono12
Mono16
Vertical Binning
Horizontal Binning
AOI Count
AOI Selector
AOI Offset
AOI Width
AOI Port Selector
Master
Slave
Max Width
Height
Input Pixel Size
10 Bits/Pixel
12 Bits/Pixel
16 Bits/Pixel
The Piranha XL XDR Camera
TestImageSelector
Off
Each Tap Fixed
Grey Horizontal Ramp
Pixel Format
BinningVertical
BinningHorizontal
multipleROICount
multipleROISelector
multipleROIOffsetX
multipleROIWidth
PortRoiSelector
Master
Slave
WidthMax
Height
pixelSizeInput
Bpp10
Bpp12
Bpp 16
Selects the type of test image that is sent by
the camera. Choices are either as defined by
SNFC and/or as provided by the device
manufacturer.
Selects sensor video to be output from sensor
Selects a grey scale for each tap of the
sensor
Select a grey scale ramp for each tap of the
sensor
Output image pixel coding format of the
sensor. For Piranha XL, this currently is 8,12
for normal TDI operation and 16 bits for high
dynamic range 'Fusion' mode
Number of vertically adjacent pixels to sum
together. This increases the intensity of the
pixels and reduces the vertical resolution of
the image
Number of horizontally adjacent pixels to sum
together. This increases the intensity of the
pixels and reduces the horizontal resolution of
the image
Specified the number of AOI's in an acquired
image
Select 1 of up to 4 AOI's when setting the
AOI Offset & AOI Width
Location of the start of a single Area of a
Interest to be output on the cable specified by
CLHS Port AOI Selector feature
Width of the start of a single Area of a Interest
to be output on the cable specified by CLHS
Port AOI Selector feature
Used to select which cable the AOI values are
applied.
Selects Master (Control/Data1) data port
Selects Slave (Data2) data port
The maximum image horizontal dimension of
the image. (RO)
Height of the Image provided by the device (in
lines). (RO)
Size of the image input pixels, in bits per pixel.
(RO)
Senor input data path is 8, 12 or 16 bits per
pixel.
1.00
Beginner
DFNC
1.00
Beginner
DFNC
1.00
Invisible
DFNC
1.00
Beginner
SFNC
1.00
Beginner
SFNC
1.00
Beginner
SFNC
1.00
Beginner
SFNC
1.00
Beginner
1.00
Beginner
1.00
Beginner
1.00
Beginner
1.00
Beginner
1.00
DFNC
Invisible
• 55

Advertisement

Table of Contents
loading

This manual is also suitable for:

Piranha xl xdr px-hm-16k12x-00-rPiranha xl px-hm-16k06x-00-rPiranha xl px-hm-16k12x-00-rPiranha xl px-hm-16k12b-00-r

Table of Contents