Table of Contents
Advertisement
Service & Appearance Care
Headlight Bulb Replacement
(CON T )
3.
Twist the L-shaped bulb assembly
counterclockwise
%
turn until the
flanges align with the slots in the
retainer ring.
4.
Pull out the bulb assembly.
5.
Disconnect the bulb wiring harness
from the bulb assembly by lifting the
plastic locking tab.
wiring harness.
reversing step 3.
black knobs.
6. Snap a new bulb assembly onto the
7. Replace the bulb assembly by
8.
Replace the bulb housing and the two
Taillight Bulb Replacement
For the type of bulb, see the Index under
Replacement Bulbs.
1.
Open the rear side windows and
2. Remove the two screws from the
3.
Undo the spring clips under the
liftgate.
taillight housing.
weatherstrip at the rear of the side
window.
4. Pull off the entire taillight housing.
5. Pinch the lever and twist the bulb
assembly
X
turn counterclockwise to
remove.
6.
Remove the bulb by pressing in and
turning turn counterclockwise.
7. Line up the small retainer bumps on
the replacement bulb so that the
lower bump slides into the deepest
slot in the housing. Press in and twist
the bulb
turn clockwise.
Reposition the bulb assembly in the
taillight housing. Turn the assembly
turn clockwise to lock in place.
8.
Replace the entire taillight housing
and screws.
Advertisement
Table of Contents
