Table of Contents
Advertisement
.
I .
To Play a Cassette ripe:
Press PWR to turn the radio on. The
radio will play until a cassette is pushed
into the cassette entry door (the tape
side goes in first). Do not use tapes that
are longer than 90 minutes (45 minutes
on each side).
This audio system has automatic
00
Dolby B NR@ to reduce background
noise on Dolby encoded tapes. Dolby@
Noise Reduction is manufactured under
license from Dolby Laboratories
Licensing Corporation. Dolby@ and
the
00
symbol are trademarks of Dolby
Laboratories Licensing Corporation.
PROG (Program): Press to change the
side of tape being played. When the end
of a tape is reached, the other side will
then play.
0 , :
This button sets tape bias. When
playing high bias chrome or metal tapes,
press the button to turn the CrOz display
on. When playing standard tapes, press
again to turn the display off.
REV (Reverse): Press to reverse the tape
rapidly; press again to play the tape.
(The radio plays while a tape is rewinding.)
FWD (Fast Forward): Press to advance
the tape rapidly; press again to play. (The
radio plays while the tape is advancing.)
PREV (Previous): Press PREV to
repeat a passage. The tape will back up
and stop at the first four-second quiet
spot in the tape, or when you press
PREV again or PROG.
NEXT Press to go to
the next selection
on the tape. The tape will stop at the
first four-second quiet spot in the tape,
or when you press NEXT again or
PROG.
ST-PL (Stop-Play): Press to switch from
the tape to the radio. Press again to
resume playing the tape.
EJECT Press to eject the cassette tape
(the radio will then play).
7 2 s
1
I . .
Advertisement
Table of Contents
