Table of Contents
Advertisement
Problems on the Road
' i
Changing a Flat Tire
(CONI:)
4.
The compact spare tire is located
under the vehicle, behind the rear
bumper. Insert the narrow end of the
shaft into the hole above the rear
bumper. Then attach the folding
wrench to the shaft.
5.
Rotate the folding wrench counter-
clockwise
to
lower the compact spare
tire until it can be pulled from under
the vehicle.
2 0 6
6.
Slide the cable retainer through the
center of the spare, then place the
compact spare tire near the flat tire.
7. If your vehicle has aluminum wheels,
each wheel nut is covered with a
nylon cap. Use the folding wrench to
remove the nylon caps from the
wheel nuts before you loosen the
nuts.
If your vehicle has the plastic "bolt-on"
wheel covers, you cannot separate the
nylon wheel nut caps from the cover.
Loosen them completely using the
folding wrench, and remove the wheel
cover. If the wheel nut caps have been
completely loosened, the wheel cover
will come off easily.
Advertisement
Table of Contents
