Table of Contents
Advertisement
Checking Bur Restraint Systems
Now and then, make sure
a l l
your belts,
buckles, latch plates, retractors,
anchorages and reminder systems are
working properly. Look for any loose
parts or damage. If you see anything that
might keep a restraint system from
doing its job, have it repaired.
Replacing Satkty Belts M e r a
Crash
If you've had a crash, do you need new
belts?
After a very minor collision, nothing
may be necessary. But if the belts were
stretched, as they would be if worn
during a more severe crash, then you
need new belts.
If belts are cut or damaged, replace
them. Collision damage also
m y
mean
you will have to have safety belt parts,
like the retractor, replaced or anchorage
locations repaired-even if the belt
wasn't being used at the time of the
collision.
Q:
What's wrong with this?
A:
The belt is tom.
Torn or frayed belts may not
I
1
protect you in
a
crash. They
can rip apart under impact forces.
If a belt is tom or frayed, get a
Y I
new one right away.
Before replacing any safety belt, see
your dealer for the correct part number.
You'll need the model year and model
number for your vehicle. The model
43
...
Advertisement
Table of Contents
