Table of Contents
Advertisement
CAUT/ON
I
/
14. Remove any corrosion or dirt from
Rust or dirt on the wheel, or
t
- I
the parts to which it is
fdbltllud, can make the wheel nuts
become loose after a time. The
wheel could come off and cause an
accident. When you change a
wheel, remove any rust or dirt
from
the
places where the wheel
attaches to the vehicle. In an
emergency, you can use a cloth or
a paper towel to do this;
but
be
sure to use a scraper or wire brush
later, if you need to, to get all the
rust or dirt off.
Never use oil or ,grease on
studs or
nuts. If you do, the
nuts might come loose.
Your
wheel
could tidl off, causing a serious
I
acciknt.
I
' I
the wheel bolts, mounting surfaces
or spare wheel. Place the spare on
the wheel mounting surfke.
15. Replace the wheel nuts with the
rounded end of the nuts toward the
wheel. Tighten each nut by hand
until the wheel is held against the
hub.
Advertisement
Table of Contents
