Table of Contents
Advertisement
Seats & Safety 6elts
Replacing Rear Bucket Seats
Follow the diagram on the back of the
seats
to
replace the seats in their proper
location.
The
LEFI' ONLY seats fit only in the
left positions. The RIGHT ONLY seats
fit only in the right positions. The
CENTER OR LEFT seat fits in the
center position and in either left
position.
To install third row seats, if your vehicle
is equipped with them, the second row
seats must be tilted forward or removed.
Don't try to place the seats in backward,
because they won't latch that way.
1. With the entire seat tilted forward,
place the front hooks of the seat latch
onto the front floor pins.
2. Firmly press the rear hooks onto the
rear floor pins. The seat should lock
into position.
3.
Lift the upper lever and pull up on
the seatback until it locks upright.
4. Push and pull
on the seat to check
that it is locked.
5. Check to see that you have put the
seats into the proper location,
according to the label on each seat. If
not, the seats may not latch properly,
and your passengers may not have the
proper safety belt.
Advertisement
Table of Contents
