Table of Contents
Advertisement
SETTING THE IP ON WINDOWS 10
A
Step 6
Select the "Internet Protocol Version 4 (TCP/IPv4)" option. Click on the "Properties" button
ure
A.6).
Step 7
Write down the current settings of your network card, because later it will be necessary to restore
these settings.
Select the "Use the following IP address" option.
Set the IP address within the same range as the Drive Scan IP; for example, changing the last
digit to 20 (or other unused number), resulting in 192.168.0.20.
Change the subnet to 255.255.255.0.
Low Voltage Devices | A-2
Figure A.6: Selecting IPv4 option
(Fig-
Advertisement
Table of Contents
