Monitoring - WEG Drive Scan Manual

CONNECTING A DEVICE TO THE DRIVE SCAN

5.5.4 MONITORING

The Drive Scan continuously monitors the CFW500 parameters specified in
Monitored by the CFW500 on page 5-19
After a cycle of all these readings, as well as of the other assets connected to the Drive Scan, a new reading cycle
starts automatically.
The parameters read are transformed into attributes, which can be:
Only at initialization;
Last value read;
Average value;
Minimum value;
Maximum value.
5
Every 5 minutes, the Drive Scan publishes the attributes to the WEG Fleet Management platform.
In case of an internet connection failure, the Drive Scan stores the data for up to 30 days in the internal memory,
publishing it to the MFM when the connection is reestablished.
In case the CFW500 fails, the Drive Scan automatically publishes the parameters specified in
Attributes Monitored in Events by the CFW11 on page 5-7
cyclical period of publication.
Low Voltage Devices | 5-18
.
asynchronously, that is, without waiting for the normal
Section 5.5.4.1 Attributes Cyclically
Section 5.2.4.2