WEG Drive Scan Manual page 10

Drive
WARNING!
Be sure to power the Drive Scan within 110V to 220V power range (with frequency from 50 to 60Hz).
Installation and configuration of the Drive Scan communication with WEG devices, as well as the platform config-
urations, are covered in the following chapters.
(1)
110-220V
50-60Hz
(3a)
Figure 2.2: Instructions for the Drive Scan Physical Installation
INSTALLATION RECOMMENDATIONS
Or
12V
(2)
Drive
110-220V
50-60Hz
(3b)
Low Voltage Devices | 2-1
2