Prepare The Printer For Use - Entrust Sigma Series Cleaning Manual

Prepare the Printer for Use

Do the following after the cleaning cycle completes.
1. Unlock the printer locks.
2. Replace the cards in the input hopper of a single-hopper printer and
close and lock the hopper.
3. Install a new cleaning roller on the ribbon cartridge. Refer to
the Cleaning Roller" on page 10.
4. Load the print ribbon into the printer.
5. Close the printer cover. Press down on the ridges on the front of the
cover to latch it completely.
6. Lock the printer.
7. Discard the used cleaning card and cleaning roller
Printer best practices recommend that you clean the printer every
500 cards processed. If enabled, the message "Cleaning required"
displays on the printer LCD panel when the configured cleaning
count is reached. Clean the printer to continue printing.
An administrator can change the configured cleaning count using
the Printer Dashboard.
528293-001_B
Cleaning Guide
"Replace
9