Multi-Hopper Printer - Entrust Sigma Series Cleaning Manual

Single-Hopper Printer (cont.)
4. Load the cleaning card into the input
hopper.
5. Close and lock the input hopper.
6. Continue with
Card" on page

Multi-Hopper Printer

1. Unlock the printer and open the
printer cover. Refer to
Begin" on page
2. Remove the print ribbon, close the
cover, and lock the printer.
3. Pull out the multi-hopper exception
slide and insert the cleaning card.
4. Push in the exception slide.
5. Continue with
Card" on page
528293-001_B
"Run the Cleaning
8.
Cleaning Card
"Before You
6.
"Run the Cleaning
8.
Cleaning Guide
7