Package Contents/Intended Use/Features/Specifications - Vessel 20USB-S1F Instruction Manual And Safety Instructions

PACKAGE CONTENTS
1 Power tool(Hi-Speed)
1 Bit
1 USB Charging cable(1m)
1 Instruction manual
NAME OF PARTS
7
6
1
8
1. Screwdriver handle
2. Driver bit holder
3. Sleeve
4. Switch
5. LED light
INTENDED USE
The 220USB is used for tightening and loosening screws. The
220USB is an electric screwdriver that can be charged by
connecting a USB charging cable.
FEATURES
・ Quick tightening can be performed efficiently with the aid of
an electric motor. The final tightening is automatically switched
to manual operation.
・ The high-intensity LED light brightens the blade edge even in
dark places.
・ The switch is a slide switch that can be operated forward and
backward with light force.
・ Small and light with USB rechargeable Li-ion battery.
・ Various commercially available bits of 6.35 mm(1/4inch)
are available.
TECHNICAL SPECIFICATIONS
- Rated voltage
- Capacity
No-load speed
Torque
- Electric power (Max.)
- Hand operation (Max.)
Weight (not including accessories)
4
3
5
2
6. Charging lamp
7. Charging port
8. Screwdriver bit
3.6 V DC
800 mAh
1200 min
-1
0.4 N･m(3.5lbf-in)
10 N･m(88.5lbf-in)
160 g
Permitted ambient temperature
- during charging
- operating* and storaging
Battery
Number of battery cells
Charging time
Number of charges**
Charging port
Noise
according to EN 62841-1 Annex I
Vibration values
according to EN 62841-1 Annex I, EN 62841-2
Input power (maximum) - Volt
* limited performance at temperatures <0 °C
**Actual battery life will vary depending on specifications.
- Specifications and sizes are subject to change without notice.
NOISE/VIBRATION INFORMATION
Sound emission values determined according to EN 62841.
Typically the A-weighted sound pressure level of the product is
52.9 dB(A). Uncertainty K=3 dB.
The noise level when working can exceed 70 dB(A). Wear
hearing protection!
Screwdriving without impact: ah<0.276 m/s², K=1.5 m/s²
The vibration level given in this information sheet has been
measured in accordance with a standardised test given in EN
62841 and may be used to compare one tool with another. It
may be used for a preliminary assessment of exposure. The
declared vibration emission level represents the main applica-
tions of the tool. However if the tool is used for different
applications, with different accessories or insertion tools or is
poorly maintained, the vibration emission may differ. This may
significantly increase the exposure level over the total working
period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may
significantly reduce the exposure level over the total working
period. Identify additional safety measures to protect the
operator from the effects of vibration such as: maintain the tool
and the accessories, keep the hands warm, organisation of
work patterns.
REPLACEABLE PARTS
- END CAP
6
0ﾟC(32ﾟF) - 40ﾟC(104ﾟF)
0ﾟC (32ﾟF) - 45ﾟC(113ﾟF)
Li-Ion
1
Approx. 60 min
Approx. 500 charges
micro USBType-B
63.9 dB
0.276 m/s
5 V DC
-Current 1 A
(32ﾟF)
- ALUMINIUM RING
2