Safety Warnings For Screwdrivers - Vessel 20USB-S1F Instruction Manual And Safety Instructions

with the switch is dangerous and must be repaired.
▶Disconnect the plug from the power source and/or
remove the battery pack, if detachable, from the
power tool before making any adjustments, changing
accessories, or storing power tools. Such preventive
safety measures reduce the risk of starting the power tool
accidentally.
▶Store idle power tools out of the reach of children
and do not allow persons unfamiliar with the power
tool or these instructions to operate the power tool.
Power tools are dangerous in the hands of untrained users.
▶Maintain power tools and accessories. Check for
misalignment or binding of moving parts, breakage of
parts and any other condition that may affect the
power tool's operation. If damaged, have the power
tool repaired before use. Many accidents are caused by
poorly maintained power tools.
▶Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges are less likely
to bind and are easier to control.
▶Use the power tool, accessories and tool bits etc.
in accordance with these instructions, taking into
account the working conditions and the work to be
performed. Use of the power tool for operations different from
those intended could result in a hazardous situation.
▶Keep handles and grasping surfaces dry, clean and
free from oil and grease. Slippery handles and grasping
surfaces do not allow for safe handling and control of the tool in
unexpected situations.
Battery tool use and care
▶Recharge only with the charger specified by the
manufacturer. A charger that is suitable for one type of
battery pack may create a risk of fire when used with another
battery pack.
▶Use power tools only with specifically designated
battery packs. Use of any other battery packs may create a
risk of injury and fire.
▶When battery pack is not in use, keep it away from
other metal objects, like paper clips, coins, keys,
nails, screws or other small metal objects, that can
make a connection from one terminal to another.
Shorting the battery terminals together may cause burns or a
fire.
▶Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact accidental-
ly occurs, flush with water. If liquid contacts eyes,
additionally seek medical help. Liquid ejected from the
battery may cause irritation or burns.
▶Do not use a battery pack or tool that is damaged or
modified. Damaged or modified batteries may exhibit unpre-
dictable behaviour resulting in fire, explosion or risk of injury.
▶Do not expose a battery pack or tool to fire
or excessive temperature. Exposure to fire or temperature
above 130ﾟC(266ﾟF) may cause explosion .
▶Follow all charging instructions and do not charge
the battery pack or tool outside the temperature
range specified in the instructions. Charging improperly
or at temperatures outside the specified range may damage the
battery and increase the risk of fire.
Service
▶Have your power tool serviced by a qualified repair
person using only identical replacement parts. This
will ensure that the safety of the power tool is maintained.
▶Never service damaged battery packs.Service of
battery packs should only be performed by the manufacturer or
authorized service providers.

SAFETY WARNINGS FOR SCREWDRIVERS

▶Do not use a screwdriver as a pry bar,
chisel, punch or hammer. Broken screwdriver can
cause injury.
▶Hold power tool by insulated gripping surfaces,
when performing an operation where the fastener
may contact hidden wiring. Fasteners contacting a "live"
wire may make exposed metal parts of the power tool "live" and
could give the operator an electric shock.
▶Hold the machine with a firm grip. High reaction
torque can briefly occur while driving in and loosening screws.
▶Secure the workpiece. A workpiece clamped with
clamping devices or in a vice is held more secure than by hand.
▶Always wait until the machine has come to a
complete stop before placing it down.
The tool insert can jam and lead to loss of control over the
power tool.
▶Before any work on the machine (e. g., mainte-
nance, tool change, etc.) as well as during transport
and storage, set the rotational direction switch to the
center position. Unintentional actuation of the switch can
lead to injuries.
▶Protect the battery against heat, e.g.,
against continuous intense sunlight, fire,
water, and moisture. Failure to do so may result in an
explosion.
▶In case of damage and improper use of the battery,
vapours may be emitted. Ventilate the area and seek
medical help in case of complaints. The vapours can irritate the
respiratory system.
▶This product contains a lithium battery. A lithium
battery reaches its end of life after many years of use. To protect
the environment, follow the treaties for ecological protection of
local governments of your country to properly dispose of this
battery.
Lithium-ion batteries are recyclable
5